The reject on the door has been frozen for…who knows how long. I’ve been trying to free it up since I brought it home. I tried 3-in-1, WD-40, propane, even beating it with a hammer. Didn’t do anything. Finally I doused it with 3-in-1 and set it down for a […]
Peale
150 posts
I don’t know if any of you guys know, but Home Depot closed down 11 of their stores. One of them was in my town here. So when they were clearancing stuff out I picked up a spray bottle of Goof Off 2 for latex paint. I figured for a […]
Initial picture. The bezel is missing the upper left hand corner. It’s in the bottom of the cab. Otherwise it’s near flawless. 🙁 The good news is the plan is to turn it into a Donkey Kong 2, so I’ll get a brandy-new one. The bad news is the art […]
I’ve been getting pieces for this here and there. eBay is good for Williams parts. Installed the marquee. That’s the extent of the work done so far. Before: After: edit: I just realized I uploaded the wrong image. I’ll fix it later.
Went out to the storage area today to take some stuff home with me, and take some stuff there to install. Opened my toolkit (which contains a 1/4″ driver with bits) and found the driver missing. I’d left it home on my bench. So I was unable to remove the […]
I’ve actually started sourcing parts for this beastie. Bought a Stargate ROM board off eBay yesterday.
The marquee fixture worked just fine with a bit of adjustment. Bulb is a bit dark at one end, but I’ll worry about that later. Stripped and repainted the coin door. Tidied up the wiring a bit. The JAMMA harness had it’s wires every which way. Whoever converted this cabinet […]