The disassembled control panel has been sitting on the chest freezer in the kitchen for a month now. So I assembled it.

I still need new bolts to hold the CPO on, but the four I have on there right now will do to keep things together.

One thing I noted was that the holes in the CPO are very close to the original spacing, but just enough off that they’re a bit cocked. I’ll have to make some minute adjustments and hopefully not kill it in the process. The heads of the bolts are only so big.

I saw another project recently that had the buttons for a D2K replaced with other colors: white for the player buttons and yellow for jump. I do believe I’m going to go that route.