I pulled the original PS to see why there wasn’t any 12V on the dedicated audio line.
Was pretty easy to figure out; someone intentionally removed a critical component so it wouldn’t work.
Guessing so it wouldn’t die under load.
You may also like
Had a little slack time at work today. Decided to tackle the gouges taken out of the board and patch them up. […]
Pulled the monitor today – what a mess! Cobwebs everywhere. This allowed me to get to the bolts that hold the monitor […]
Really should have gotten some pictures of this before I started work on it. Two years ago, when I took a tour […]
The original control panel wood was replaced. Too much wood to properly place the CPO back on top of it (there are […]